Aehr Receives $1.2 Million Order for Multiple WaferPaks™ for Full-Wafer Production Test and Burn-in of Silicon Photonics Devices
Fremont, CA (March 9, 2021) – Aehr Test Systems (NASDAQ: AEHR), a worldwide supplier of semiconductor test and reliability qualification equipment, today announced it has received a $1.2 million order for multiple WaferPak™ Contactors from one of its lead FOX-XP test and burn-in system customers for their installed base of FOX multi-wafer test systems. The orders are for increased volume of production test of the customer’s silicon photonics devices for data center-oriented fiber optic support. The WaferPaks are expected to ship over the next quarter.
Gayn Erickson, President and CEO of Aehr Test Systems, commented, “We are excited to receive this order for our proprietary WaferPak contactors from this customer, one of the world’s largest semiconductor manufacturers, and to see their continuing ramp-up in production test volume. This customer continues to look to Aehr to support their high-volume production ramp in wafer-level burn-in capacity and to forecast significant growth in shipments for silicon photonics devices that we expect to drive the need for additional production test and burn-in capacity for multiple years into the future.
“We continue to be very optimistic about the silicon photonics and photonics sensors markets and believe they will be significant growth drivers for Aehr. Market Research Engine projects silicon photonics for data center and high-performance computing to grow at a compounded rate of 26.8% from 2017 through 2024. The rapid growth of integrated optical devices in data centers and data center interconnect infrastructure, mobile devices, automotive applications, and now wearable biosensor markets is driving substantially higher requirements for initial quality and long-term reliability, and they are increasing with every new product generation. We believe these new applications are driving an entirely new level of quality and reliability expectation for these systems and pose a significant long-term growth opportunity for Aehr.”
The FOX-XP system, available with multiple WaferPakTM Contactors (full wafer test) or multiple DiePakTM Carriers (singulated die/module test) configurations, is capable of functional test and burn-in/cycling of integrated devices such as silicon carbide power devices, silicon photonics as well as other optical devices, 2D and 3D sensors, flash memories, Gallium Nitride (GaN), magnetic sensors, microcontrollers, and other leading-edge ICs in either wafer formfactor, before they are assembled into single or multi-die stacked packages, or in singulated die or module formfactor.
About Aehr Test Systems
Headquartered in Fremont, California, Aehr Test Systems is a worldwide provider of test systems for burning-in and testing logic, optical and memory integrated circuits and has installed over 2,500 systems worldwide. Increased quality and reliability needs of the Automotive and Mobility integrated circuit markets are driving additional test requirements, incremental capacity needs, and new opportunities for Aehr Test products in package, wafer level, and singulated die/module level test. Aehr Test has developed and introduced several innovative products, including the ABTSTM and FOX-PTM families of test and burn-in systems and FOX WaferPakTM Aligner, FOX-XP WaferPak Contactor, FOX DiePak® Carrier and FOX DiePak Loader. The ABTS system is used in production and qualification testing of packaged parts for both lower power and higher power logic devices as well as all common types of memory devices. The FOX-XP and FOX-NP systems are full wafer contact and singulated die/module test and burn-in systems used for burn-in and functional test of complex devices, such as leading-edge memories, digital signal processors, microprocessors, microcontrollers, systems-on-a-chip, and integrated optical devices. The FOX-CP system is a new low-cost single-wafer compact test and reliability verification solution for logic, memory and photonic devices and the newest addition to the FOX-P product family. The WaferPak contactor contains a unique full wafer probe card capable of testing wafers up to 300mm that enables IC manufacturers to perform test and burn-in of full wafers on Aehr Test FOX systems. The DiePak Carrier is a reusable, temporary package that enables IC manufacturers to perform cost-effective final test and burn-in of both bare die and modules. For more information, please visit Aehr Test Systems’ website at www.aehr.com.
Safe Harbor Statement
This press release contains certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. Forward-looking statements generally relate to future events or Aehr’s future financial or operating performance. In some cases, you can identify forward-looking statements because they contain words such as “may,” “will,” “should,” “expects,” “plans,” “anticipates,” “going to,” “could,” “intends,” “target,” “projects,” “contemplates,” “believes,” “estimates,” “predicts,” “potential,” or “continue,” or the negative of these words or other similar terms or expressions that concern Aehr’s expectations, strategy, priorities, plans, or intentions. Forward-looking statements in this press release include, but are not limited to, Aehr’s ability to generate bookings and revenue increases in the future, including the second half of fiscal 2021; future requirements and orders of Aehr’s new and existing customers; bookings forecasted for proprietary WaferPakTM and DiePak consumables across multiple market segments; the temporary nature of customer pushouts; shipping timelines for products and follow-on capacity orders; the growth of Aehr’s systems and consumables, including as a percentage of total sales; financial guidance for fiscal 2021, including related to revenue and profitability; Aehr’s ability to expand its number of customers using its FOX-PTM solutions; the ability to secure potential customer engagements; expectations related to long-term demand for Aehr’s productions and the attractiveness of key markets; the belief that Aehr will be stronger after the current worldwide COVID-19 pandemic, including expectations related to greater production, more customers, more applications, and higher value products. The forward-looking statements contained in this press release are also subject to other risks and uncertainties, including those more fully described in Aehr’s Form 10-K for fiscal 2020, Form 10-Q for the first fiscal quarter of fiscal 2021 and other reports filed from time to time with the Securities and Exchange Commission. Aehr disclaims any obligation to update information contained in any forward-looking statement to reflect events or circumstances occurring after the date of this press release.
| Contacts: | |
| Aehr Test Systems Vernon Rogers EVP Sales and Marketing (510) 623-9400 x215 vrogers@aehr.com |
MKR Investor Relations Inc. Todd Kehrli or Jim Byers Analyst/Investor Contact (213) 277-5550 aehr@mkr-group.com |
